Non Slip Luminous Tape

Product Description

Caution Lines Company is a manufacturer of non slip luminous tape for stair edges, corridors, exits, ramps, and other low-light walking routes where visibility and foot traction matter at the same time. The tape uses a glow layer, 46-60 grit mineral texture, and pressure-sensitive adhesive to help mark walking direction while improving shoe grip. It is made for building, warehouse, factory, and facility safety projects that require clean slitting, pre-cut strips, stable packaging, and sample testing before production.

Product Showcase

Technical Data Sheet

Product Overview

This product is not a smooth glow tape used only for marking. It is a glow in the dark anti slip tape built with PVC or PET backing, a photoluminescent layer, mineral grit, and solvent acrylic adhesive. The glow layer stores light from natural or artificial sources, then gives visible guidance when the surrounding area becomes dark. The surface is textured, so it can help shoes keep better contact on stair noses, corridor edges, ramp lines, platform borders, and warehouse passage markings.

For most project use, the reference total thickness is 0.65-0.95 mm, depending on the backing, grit grade, and luminous layer build. Slit roll tolerance is commonly controlled around +/-1 mm, while pre-cut stair strip length tolerance is usually around +/-2 mm. Before larger production, sample strips should be placed on the actual surface, such as concrete stairs, painted metal, ceramic tile, PVC flooring, epoxy floor, or warehouse walkway coating. A 24-72 h check can show whether the adhesive bonds well, the edges stay flat, the glow remains clear, and the grit feel is suitable for the walking area.

Benefits

• Gives both low-light direction and shoe traction, instead of only visual marking.
• Helps mark stair edges, exit corridors, ramps, platforms, and turning points where people need clearer footing.
• Typical glow duration is 4-8 h after sufficient charging, depending on light strength, charging time, and site darkness.
• 46-60 grit reference options can be selected for stair traffic, shoe type, cleaning frequency, and sheltered outdoor use.
• Peel adhesion can reach 8-14 N/25 mm on stainless steel after 24 h dwell under reference test conditions.
• Acrylic adhesive performs better on clean, dry, flat surfaces after firm roller pressure and enough dwell time.
• Rolls, narrow slit widths, sample rolls, and pre-cut stair strips can be packed for project installation.
• A 24-72 h edge-lift observation helps reduce the risk of poor bonding before larger production.

When should glow duration and grip performance be tested before installation?

Glow duration should be tested before installation when the tape will be used on stair edges, dark corridors, exit routes, ramps, or areas where temporary power failure may affect movement. A small sample can be charged under the real site lighting, then checked in a dark room or low-light passage to see whether the 4-8 h reference glow range is enough. The grit surface should also be walked on under dry and slightly damp conditions. This check helps confirm strip width, adhesive tack, liner release, carton packing, grit comfort, and whether the luminous area stays visible after slitting or pre-cutting.

Applications

• Stair tread edges in factories, schools, hotels, office buildings, and public facilities.
• Exit corridors and evacuation passages where emergency exit anti slip tape is needed for low-light guidance.
• Step fronts, landings, and turning points that need photoluminescent stair safety tape with clearer edge visibility.
• Warehouse walkways, loading platforms, maintenance rooms, and service areas where night visible grip tape can support safer movement.
• Ramps, indoor parking passages, platform edges, and sheltered outdoor steps that need both glow direction and shoe traction.
• Projects that require slit rolls within +/-1 mm tolerance or pre-cut stair strips within +/-2 mm reference tolerance.

How does the luminous layer work with non slip grit on stairs and exits?

A well-made non slip luminous tape uses the glow layer to show the route and the mineral grit to support walking traction. The photoluminescent layer absorbs light before use and releases visible guidance when the area becomes dim, while the grit surface helps shoes stay in contact with stair treads, passage edges, exit paths, and platform steps. This makes luminous anti slip stair tape more useful than smooth glow tape in places where people need both direction and footing support. For factory production, it can be supplied as master rolls, narrow slit rolls, or pre-cut strips, with checks for edge lifting, glow consistency, adhesive bonding, liner peeling, and carton packing.

FAQ

Is this tape the same as ordinary luminous tape?

No. Ordinary luminous tape mainly provides visual marking. This tape adds a 46-60 grit mineral surface, so it supports both low-light visibility and foot traction.

How long can the tape glow in the dark?

Typical glow duration is 4-8 h after sufficient charging. Actual performance depends on charging time, light source strength, and site darkness.

Which surfaces should be tested first?

Concrete stairs, painted metal, ceramic tile, PVC flooring, epoxy floors, and warehouse walkways should be tested with a 24-72 h edge-lift observation.

Can it be supplied in pre-cut stair strips?

Yes. Rolls, narrow slit widths, pre-cut stair strips, sample rolls, and labeled carton packaging can be prepared according to project size and installation needs.